How to Fix Canon Printer Error Code 5800
Canon Printers are the most considerable printing gadgets that offer various printing highlights at a reasonable cost. In any case, specialized glitches are very normal with each specialized gadget. In this manner, your Canon printer Error is likewise no special case to that. It is surely irritating to go over the sudden mistake messages amid your critical work.
In such manner, our Canon Printer Support Team has given some conceivable causes and compelling answers for Fix Canon Printer Error Code 5800. So as to resolve the issue, you have to know the center of the issue first. In this way, experiencing this article may enable you to comprehend and resolve your printing issue better.
There are numerous cases where clients can’t resolve Canon Printer Error and issues. To Fix Canon Printer Error 5800 is a standout amongst the most irritating and testing assignments for clients, and need specialists help. The mistake code 5800 methods the waste ink counter reset (yellow and orange light, blazing on the other hand a few times). Group printers ordinarily require re-setter to reestablish the setting to the underlying. Standard printer must be reset subsequent to completing a ton of print movement. In the event that the Canon Printer’s need to be reset, ordinarily portrayed by squinting orange and green on the other hand, and on the screen will show up mistake code 5800. Along these lines, in the event that you have encountered a similar issue, at that point you should pursue the underneath given advances or answers for fix the issue. You can acquire exhaustive help with technical support specialists at dialing Canon Printer Technical Support Number.
Solutions to Fix Canon Printer Error Code 5800
Solution 1:- Replace the Waste Ink Absorber
You can pursue the means underneath to reset the blunder code, however to tackle the issue for all time, it will best to supplant the waste ink safeguard.
Step 1:- Press the “Power” Button
With the Canon Printer controlled off yet associated with a power source. Press the “Power” catch while squeezing and holding the “Stop/Reset” catch.
Step 2:- Press the “Stop/Reset” Button
At the point when the Power is lit, press the “Stop/Reset” catch multiple times
While squeezing and holding the “Power” catch.
Step 3:- Move Into a Service Mode
While discharging the “Power” catch and the “Stop/Reset” Button (paying little respect to arrange), the printer will move into an administration mode. (Hanging tight for menu determination)
Step 4:- Press “Stop/Reset” Button
At the point when the on/off lights in green, press the “Stop/Reset” catch the predefined number of time(s) as indicated by the capacity recorded in the table underneath.
(Each time the “Stop/Reset” catch is squeezed, the LED lights then again in orange and green, beginning with orange.)
Note: Make beyond any doubt there is have to squeeze multiple times for waste ink counter reset.
The quantity of the Reset catch squeezing LED Function Remarks
- 0 time Green Power off
- 1 time Orange Service design print
- 2 times Green EEPROM print
- 3 times Orange EEPROM reset
- 4 times Green Waste ink counter reset
Step 5:- Turn On Canon Printer
Turn off the printer. (It must be turn off) at that point turn it on once more.
Presently check the Canon Printer Error Code 5800 is settled. On the off chance that not, at that point go to next arrangement.
Solution 2:- Enter Canon Printer In Service Mode
The second arrangement works best for multifunction printers. You should motivate your Canon printers to keep running in administration mode with the goal that it can chip away at the issue itself, and make your printer think the ink safeguard cushion is unfilled rather than full. On the off chance that you can open your printer up and clean this ink store, kindly do it since it plume is some ink in it. You can get it clean by a napkin and clear the store a bit.
Step 1:- Turn Off Canon Printer
First of all, turn your canon multifunction printer on.
Step 2:- Go to Press the Menu Option
Then, press the menu button on the printer.
Step 3:- Put Printer in Service Mode
Presently, put your group printer in administration mode. To do this, you should press the “Sweep”, “Duplicate” and “Output” catches in that accurate request. It would be ideal if you consider the administration mode menu is completely in English, similarly as a PC’s BIOS.
Step 4:- Reach to the “COUNTER ACCESS” option
You can now press the “+ key” until you’ve reached the “COUNTER ACCESS” option. Press the OK button once you are there.
Step 5:- Check Amount of Pages That You Are Printed
A page counter will now appear on your printer’s screen. The number on it indicates the number of pages you are printed in total.
Press the “OK” key.
Step 6:- Press the “COPY” button
Now, you will need to press the “COPY” button.
Step 7:- Score All the Way to Zero
Use the “-key” to lower this score all the way to zero (0). Now, press “OK” button.
Step 8:- Stop Once Get “SCAN PAGE COUNT” option
Continue to use the + symbol to look at the menu and stop once you get to SCAN PAGE COUNT. Set this counter back to zero (0) in order to wipe the score on the page counter on our canon printer, found only when it’s in service mode.
Step 9:- Set Score Back to Zero
Browse the entire menu slowly until you reach the “ABS-M DONT COUNT” option. Set this score back to zero (0) and click “OK” button.
Step 10:- Press the “Stop/Reset” Button
Press the stop/reset button after everything else has been down.
Step 11:- Turn Off “Stop/Reset” Button
Turn your printer off and back again using the on/off button on it.
Step 12:- Disconnect the Power Cable
If the INVALID KEY message appears on your computer screen at the end of this procedure, then you should disconnect the power cable from the printer and connect it once more.
By following the steps above correctly, I hope your problem will be solved.
If you still face the same Canon Printer Error Code 5800, then you get immediate online help from experts at Canon Support Number.
Submit your review