Dial +1-888-326-0222 To Fix Canon Printer Error Code 5100

The Canon Pixma MX700 multifunction printer contains associate degree liquid crystal digital display,alphanumeric display, display that shows varied error codes whenever a software package or hardware issue persists. every error code is tied to a selected number of issue to create the resolution method easier. Canon Printer Error code 5100 describes a physical error either incorrectly seated ink tank or with a paper jam. Troubleshooting the problem or error could be a fast method that solely needs a couple of normal troubleshooting measures.

Errors and causes of ErrorCanon Printer5100

  • Allus infusion that interrupts the movement of ink to cartridge or infusion hose is too short.
  • There are objects that go into the printer device
  • There is split ink or charge on Cartridge is dirty

Step 1

Press down and hold the On/Off button, which is located on the operator panel of the printer, for one second. Wait 15 seconds and then click on the button again. Attempt to scan or print a document.

Step 2

Check the paper feed tray on the front end of the Canon MX700 to see if there is any visibly paper stuck inside the printer. Open the cover of the printer by gripping the front edge of the printer and thrilling upwards.

Step 3

Grab the edge of the blocked paper and gently pull towards you to eliminate the paper from the paper feeder. Unplug the USB cable and Canon’s power cable, and switch on the printer.

Step 4

Pull off the cover tab of rear plastic and check if there is any paper jam visible or not. Grab the edge of the paper and gently pull toward you until the paper is eliminated.

Step 5

Push the rear plastic cover tab back into place, and reconnect the USB cable and power cable. Attempt to scan or print another document to see whether the error or issue is resolved or not.

Step 6

Open the cover of the printer and wait for the ink carriage to slide into view. Press the Push button on the front of the first tank ink. Pull the tank out and then push it back into place to make sure whether it is properly seated or not.

Canon Printer Support

If you are unable to fix Canon Printer Error Code 5100 Dial Canon Printer Tech Support Number +1-888-326-0222.

Leave a Reply